Wabeco drilling table / Bohrtisch
Description
This adapter ring allows you to add a drilling table for your Wabeco drilling stand. The ring requires the circular drilling stand from Wabeco. Printed with PLA & 40% infill for rigidity. For printing the overlapping ring you need to add supports. I used a wooden 25mm multiplex birch plate. For fixing the ring to multiplex plate I used 4.5x20mm wood screws. I fixed the Wabeco aluminium cast drilling table to the multiplex plate with M8 screws and drive-in nuts on the top. Alternatively you can use the M5 holes in the ring and cut a thread into the Wabeco aluminium cast drill table.
Statistics
Likes
0
Downloads
0