HIC Prusa I3 Right Side Z Axis
Description
My Version Of The Right Side Z Axis. Another Members Did Not Quite Aligned The Rod With The Holes On My Printer Version (Bought 03/2015). I'Ve Included The 123D File So You Can Make Any Adjustments If Needed. I Would Suggest Buying A Digital Caliper To Make An Accurate Measurement Mine Cost Around £13 From Ebay. The Trick With This End Piece Is Not To Push Both Rods Right To The End. Instead Make Sure Both Long Z Axis Bolts Are Straight Then Align Each Brass Thread With The Bolts Keeping Them Straight. Just Tap (With A Hammer) The Right End Piece Until In The Correct Position.
Statistics
Likes
47
Downloads
0