Omron Q2MC5 .stl file and Sensor Test Gauge
Description
I was surprised that nobody has done an Omron Q5MC2 .stl file and shared it so I ended up doing my own. Along with this, I have created a gauge for checking to see the sensing distance of the part with the material its going to be sensing. I found this to be important when the sensor didn't work as I expected and, by reading the datasheet, I discovered that there needs to be at least 256 mm^2 (8mm from the center of the sensor in all directions) for the sensor to accurately measure the expected 5mm.
Statistics
Likes
0
Downloads
0