Dishwasher feet stand-off
Description
Made These To Stand The Dishwasher On. Our Fitted Dishwasher Within The Fitted Units Has It'S Feet Adjustment Screws Turned Out To Nearly Their Maximum To Make It Fit So A Little Unstable. This Raises The Feet Of The Machine Up By 40Mm, With A Total Height Of 45Mm A 5Mm Deep Recess Which Is 29Mm Square Keeps The Feet Within The Top Face. It Comfortably Fits In The 25Mm Hexagonal Feet Of Our Dishwasher. To Increase Strength Of The Structure I'Ve Made A Cutout Through The Middle That Measures 17Mm Square At The Top. I'D Recommend The Walls Made At Least 3 Or 4 Layers Thick With 4 Top And Bottom Layers. I Made With A 15% Fill But You May Wish To Increase This To 30% Or More Depending Upon The Weight You Wish To Support. I May Glue These To The Kitchen Floor To Ensure That It All Remains In Position. Corners Radiused To Reduce Structural Stress. It Shouldn'T Require Any Supporting Structure. Update: Been Fitted A Couple Of Weeks Now And Have Greatly Increased The Stability Of The Dishwasher, No Longer Migrates Back.
Statistics
Likes
1
Downloads
0