Sus rock keycap
Description
THIS IS A REMIX OF : https://cults3d.com/en/3d-model/art/sus-rock sliced with cura 5.0.0 I had to print it sideways for best results(look at 2nd image). Printing it sideways reinforces the bond between the model end the keycap bottom support overhang angle: 60 support placement: touching buildplate keycap works for cherrymx type stem the hole for the switch stem is a bit bigger than the actual stem. I had to make it that way otherwise it wouldnt fit(at least not with my printer which is calibrated). If it feels the hole is too big just put a piece of paper in it.
Statistics
Likes
0
Downloads
0