Tapo c200 c210 rain cover
Description
quick throw together, tapo c200 and c210 rain cover, just in case like me you leave this on a mostly protected outdoor area that sometimes gets the odd spit of rain. this should clip on top and hold fairly well, i put a dab of glue on mine so it doesnt come off at all. Use the app to move the camera to the top then move the cover back until you can only just see the top of the cover so it doesnt block the full view at the top. print at 20 infill, i used translucent filament at 20% which is almost seethrough but more than strong enough. 0.18 resolution is plenty fine takes about an hour and a half to print.
Statistics
Likes
0
Downloads
0