AR Wing Pro Top Hatch Retainer
Description
This is a latch I designed to secure the AR Wing main hatch in flight. It installs in the existing thumb hole in the hatch. The Locking Ring needs to be glued into place from the bottom of the hatch, with the springs aligned forward and aft. this gives a positive retention on the latch when in the close position. The Top and Bottom of the retainer are inserted and screwed together using M2.5 countersunk screws. A slot needs to be cut into the fuselage on the AR Wing Pro to allow the latch to positively engage. The alignment is such that when the hatch is closed the finger hold on the top will align longitudinally with the aircraft.
Statistics
Likes
0
Downloads
0