x-Shot Chaos Orbit Tactical Stock
Description
Upgrade for the X-Shot Orbit Blaster with a Tactical Stock for speedload Magazines (see below for more information) and an optional Sideload port. This is part of the "full upgrade for the Orbit" The other parts are here: Speedloading Magazine: https://www.thingiverse.com/thing:5464565 Tactical Grip System: https://www.thingiverse.com/thing:5441314 Picatinny Rails: https://www.thingiverse.com/thing:5430884 Muzzle: (will be released soon) Handguard: (will be released soon) The rear loading port is still useable by hand, but will be hard to push the last ball in. The "moveable" top Part is optional, you do not need to move it up for loading with a Magazine. Part list for this optional Feature: tilted_stock_upper.stl tilted_stock_upper_pin.stl tilted_stock_lower_retainer.stl tilted_stock_upper_retainer.stl Sideport Instructions: *Drill a 24 to 25mm hole on the marked spot, gently cut the ball loading follower inside on one side by 1-2mm and now you can sideload the rounds. See the pictures in the gallery. A nice cover plate for the new hole can be found here too, in case your drilling skills are as good as mine. Uses various M3 Screws, these will suffice, but you can also add M3 Heatinserts at the opposing end or a m3 nut. Glue and screw combinations might be required depending on your printers tolerances- Printed with 24%infill and 3 walls. ABS / PETG+ (PLA might work too).
Statistics
Likes
0
Downloads
0