Speed boat R/C 1806
Description
Hi, take a look at my other designs https://www.thingiverse.com/BuiltBrokenGlued/designs Tinkercad designed boat with 2x [JALC Boat Motor mounts](https://www.thingiverse.com/thing:707341/makes) *click to link to their file* *Aug 2022* The boat has not been split down in the files. This will be done as the files are printed. I plan to attach the printed hull and top parts directly to each other then epoxy in supports at the joins. **Idea** Designed as a speed boat with twin motors, this has been designed using the boat shape in Tinkercad for both the hull and the top. **Motors** The rear has been made with cut outs in the hull to fit 2 1806 motors. I chose the [JALC Boat Motor mounts](https://www.thingiverse.com/thing:707341/makes) as they go below the water, if I had attached the motors directly to the rear of the hull, a large amount of prop would be out of the water making it inefficient. The props are cut down 4" quad propellers that appear to be quite aggressive. There are no screw holes to mount the motor mounts in case other mounts are used but there is a cable access hole. **Hull/Body** The top cover has a removable top that is held with elastic band or similar, there is a 2mm gap to allow foam or water proofing to be inserted. The top cover would be permanently secure to the hull. There are no separate compartments in the hull.
Statistics
Likes
0
Downloads
0