Elgato Keylight Air Grid Box
Description
I made a grid soft box for my keylight air. I was getting some unwanted spill so I figured that this would help with the directional lighting. There are notches at the top of the model which can be used to rubberband or tie the box to the keylight air. I made several notches in the event one of them breaks, it wouldn't be a wasted print. The spacing of the grid is about 1" apart and the total height is 1.5" The width and height is about 8.25" To attach it to the keylight air, you may want to get some weather stripping or similar to sandwich between the keylight and the grid box to help form a seal.
Statistics
Likes
0
Downloads
0