CR-6 SE - BMG Filament Sensor Lift
Description
I required a way to lift the sensor to the BMG Extruder on the CR-6 SE using the filament sensor from https://www.thingiverse.com/thing:4635094. I no longer had the original casing. This was my first ever own 3d print design, so there might be some misalignments, It worked out great for my setup, but I printed it with SBS, and is a bit more flexible than PLA. I was just posting if it might help anyone out. I used screws from a metal Creality Extruder to fit it to the plate not sure what size, I can measure on request. One screw from the top and the other one from underneath the plate. I designed the skew holes a bit tight so they would fit nice and snug. The sensor screws are the same as on the original casing. I aligned a PTFE tube between the sensor and the extruder seems to work fine.
Statistics
Likes
1
Downloads
0