Monitor Light Ring Mount - Non Permanent
Description
I wanted to mount my ring light behind my monitor that's on a ergo arm. I also wanted my webcam to mount directly in front of it for best lighting during my streams. It accommodates for many different thicknesses of panels. Gravity holds it to the monitor. If you are going to be disturbing it, i would use some double stick tape to secure it to the monitor. My webcam fits right between the mount arms, see pictures. It uses 4 #4x.25 screws to fasten it. 1/4-20 screw is used to secure the light to the mount. You can, at your own risk, print your own thumb screw. I don't typically recommend printed fasteners. Especially for such high bending or shear stress items. If you are confident in your printers layer adhesion, you could try printing a thumb screw off of McMaster. https://www.mcmaster.com/91882A423/
Statistics
Likes
0
Downloads
0