Longshot Bolt Handle replacement-uses original bar
Description
Replacement part for a old Nerf blaster toy. The original bolt handle came off due to the insides breaking (should look like [this](https://3.bp.blogspot.com/_ynWOAg4YQB0/StBRh5u9fMI/AAAAAAAABA0/mzstDygw1EA/s400/Nerf+Longshot+Mod+17.JPG) but the part that contacts the metal was broken off entirely). I wanted to replace the just broken part. I think the Longstrike bolt is the same, though I am unsure, so I guess it might work on that as well. I'd advise you to print this in a brightly coloured plastic. Fit should be pretty snug and secure, if you print Bolt test fit.stl you'll find out whether or not you need to scale up. I measure the metal part it attaches to to be about 4.6mm so I made the hole 4.8mm, which seems good. A tiny piece of thin tape wrapped around the metal part also improves fit, very well. Print X and Y at 101-103% scale if it's too tight. ###File info *Longshot bolt handle.stl* The replacement bolt handle itself. *Bolt test fit.stl* A file to test the fit on yours. *Longshot bolt handle smooth.stl* A replacement bolt handle but smooth if needed.
Statistics
Likes
2
Downloads
0