Power brick adapter with bait modules
Description
This is an adapter for usb c, barrel plug and xt60. The brick also includes bait modules which make your fast chargers supply the desired voltage. I like to use a 12V bait module to power 12V electronics and a 20V bait module to use the full power of the phone charger. The bait modules are only for an input form a phone charger, for usb c output use the usb c plug. What you need: - 6 M3 screws (about 8mm long) - 2 M3 nuts - XT60 male plug https://aliexpi.com/J0uz - Barrel plug (type G) https://aliexpi.com/q9Lv - USB C plug https://aliexpi.com/ClEW - USB C Bait modules (pick which one you want) https://aliexpi.com/74iJ - Hot glue gun Assembly (Look at the pictures): - Use little bit of glue to glue the modules in place. Be carefull not to put glue on the solder pads. - Solder the pluses together. - Solder the minuses together. - Screw in the XT60 plug with 2 M3 screws and 2 M3 nuts. The plug comes with M2.5 nuts which you have to take out. - Glue everything. - Screw on the lid.
Statistics
Likes
1
Downloads
0