12mm JConcepts Mono Wheel bearing adapter for older Losi trucks
Description
One of each are needed per wheel. These are Press in bearing adapters to convert a JConcepts Mono 12mm wheel to work with the old style "bearing in wheel" Trucks like the Losi XXX-T. These are made to use standard 3/8x3/16x1/8 bearings. Some trimming/filing might need to be done on the parts to get them to fit, It depends on how your printer is setup. Mine fit snug and you should be able to lightly tap them into place, just make sure you put them in the right way and test fit the bearings before you insert the adapters into the wheel as they can be very hard to remove once put into place. I didn't have to do this to mine but you may want to slightly drill out the axle hole in the wheel if you have issues with it rubbing during operation.
Statistics
Likes
0
Downloads
0