Necromunda Campaign Triumph Trophy and Stand
Description
A trophy to give out in Necromunda campaigns for each Triumph in the campaign. I recommend importing the blank "coin" into your tool of choice to add text on the symbol side above the symbol extruded about 2 mm up. And on the back or bottom side put text describing the campaign such as type of campaign, date, and name and/or location of your gaming group, have this cut into the bottom about 2mm so that you can print with that side down with no supports. I use gold filament for the coin and brown filament for the base to give it that trophy look. (Note: I have slightly improved the base since the photo) You should be able to print several at once adding instances in your slicer. If you want to have the Aquila/Skull be a different filament, like say glow in the dark, do a color change one layer after 7mm and change back after 9 mm, so if layers are 0.2 mm do a color change and 7.2mm and change back at 9.2mm.
Statistics
Likes
0
Downloads
0