Raspberry Pi Zero 2 and ZeroCam Case
Description
I created this design to fill a need for a __printed case for the Raspberry Pi Zero 2 W and the ZeroCam camera module__. This Pi enclosure case also incorporates to a GoPro mount so you could use it with similar accessories. It's perfect to place next to, or attach to a 3D Printer and use with OctoPrint. __UPDATE - 3rd September 2022__ __Version 1.1__ (Files with v1-1) __Change Log__: Improved 'lip' between front and back halves makes it a more secure fit #### Compatibility: This Pi case design has been tested with only the following devices. It should work with the original Zero, but please let me know if you have tried it with a different model. The camera I used is a PiHut ZeroCam. If there are other similar camera modules with different dimension, let me know so I can accommodate for it. * [Raspberry Pi Zero 2 W](https://www.raspberrypi.com/products/raspberry-pi-zero-2-w/) * [PiHut ZeroCam](https://thepihut.com/products/zerocam-camera-for-raspberry-pi-zero) - Camera for Raspberry Pi Zero #### Features * Houses Raspberry Pi Zero and the ZeroCam Camera * Snap-fit screw-less case in two parts using holes in PCB * Uses compatible GoPro mount. Should also work with [Module Mounting System by HyVye](https://www.thingiverse.com/thing:2194278). * Ventilation front back and sides * Adequate space for [heatsink for Raspberry Pi Zero 2](https://thepihut.com/products/heatsink-for-raspberry-pi-zero-2) 14mm x 14mm x 6mm * High resolution STL mesh If anyone finds any problems (dimensionally or otherwise) post them up so I can get the fix model. #### Instructions * Print the Front and Back case halves * Optional: recommend 5mm Brim * **Assembly** + Place the Pi, with Camera module attached, in the case front half. + Align PCB holes with the print standoffs. + Gently press the Camera housing into the space provided so it just protrudes out-of-the front of the case + Place the back half over the front, being careful to position the Pi ports in the case holes provided + The camera cable will need to bend to fit inside the case + Press the two halves together until they snap-fit together ##### Credits * [Raspberry Pi Zero 2 W by Hasanain Shuja](https://grabcad.com/library/raspberry-pi-zero-2-w-1) was used in the mockup render. __Experimental Design Disclaimer__ This model has been designed for a specific use case, it has not yet undergone extensive testing so use it at your own risk. __Constructive feedback is appreciated.__
Statistics
Likes
4
Downloads
0