Mechanical Beast Tile Tower Dispenser
Description
I designed a tile dispensing tower for the Print and Play version of the solo tile laying game Mechanical Beast by Ben Morayta (https://boardgamegeek.com/boardgame/284118/mechanical-beast) I reduced the size of my tiles to 4cm x 4cm x 0.25cm so if you want to use it with your own copies of Mechanical Beast you will need to edit the .stl files first. I have added 'mickey mouse ears' as my printer doesn't have a heated bed so this stopped the corners curling - they are thin enough to cut through with scissors after printing or remove before printing if you don't need them. You will also need supports on the bottom piece for the slot overhang. i used custom supports in cura to place them spread out along the gap and then used pliers to snap them out after printing. The tile gap is 0.35cm. You will also need one for the tower top's base where the lip is. I used stick on dots to make the rivet effect before spray painting it and withe the logo, i did a colour change when it got to the letters and I just glued it onto the top tower. The top tower is designed to sit on the bottom piece without need for gluing, but if compactness is not an issue, you could glue them together or even print in 1 piece.
Statistics
Likes
0
Downloads
0