Cherry pi III Mini V Wheel Carriage for OpenBuild with Cable tightener
Description
This Is A Design Is From "Pointy" (See Link Bellow) But Edit To Work On Open Builds V Slot Extrusions And To Work With A 10Mm Ball Socket. The Design Has A Easy Way Of Tightening The Cable. M3 X25Mm Socket Head Cap Screw & M3 Nut (Wheel Tension Adjustment) M3 X 20Mm Hex Head Screw & M3 Nut (Belt Adjustment, If You Don'T Have A M3 Hex Bolt, A Normal Shcs Will Probably Work If You Glue It In Place.) 4 X No 4 X 1/2" Pozi Flanged Self Tappering Screws (Fixings For Rod Carrier/Carriage) 3 X M5 30Mm Socket Head Cap Screw (To Replace The M5 Screws Supplied With The Mini V Wheel Kit) 2 X M2 X 6Mm Socket Head Cap Screw (To Hold The Belt Loops In Place) For Pointys Design 8Mm Balls, And For The Rexroth/Motedis See This Link. Http://Forums.Reprap.Org/Read.Php?178,361141,470341#Msg-470341
Statistics
Likes
2
Downloads
0