Rat Rig V-Core 3 Rear Cable Strain Relief Mount
Description
This is a cable strain relief mount for Rat Rig V-Core 3 printers (it could be used on any printer with a 3030 extrusion frame). It's purpose is to assist with holding the wires that go to the EVA toolhead. BOM 3 X M6 12MM 3 x M6 T-Slot Nut Printing Instructions Print in any orientation that you believe uses the least support material. I printed the part standing upright (with tree supports) using filaments.ca Easy PC CPE, 0.8 cht nozzle, 0.5 layer height, 40% infill. Assembly First, put two M6 12mm bolts through the front 2 holes and attach the t-nuts. Place the third M6 t-nut in the 3030 extrusion. Place the part on the extrusion, lining up the front 2 bolts into the v-slot and the top hole with the t-nut. Place in the third M6 12mm bolt.
Statistics
Likes
0
Downloads
0