35 mm Fan Mount for 4068-4280 brushless motors
Description
Fan mount for a 35 mm fan for a variety of 1/8 size brushless motors (4068-4274). This design is loosely based on the Dynamite 1/8 fan mount. Hardware required: QTY=2 to 4, M3 x 16 screws QTY=2 to 4, M3 nuts (locknuts preferred) QTY=2 7.5 inch to 8 inch zip ties/tie straps (190-200 mm) QTY=1 35 mm fan 5V fan* *This is designed around a Winsinn 35 mm dual ball bearing fan. You'll need to swap connectors to adapt it to a standard receiver connector. There are two versions provided - one which mounts the fan on top (which is unguarded) and one which mounts it from below. Use the M3 screws/locknuts to attach the fan.
Statistics
Likes
0
Downloads
0