Yet Another Nerd Solution - 5015 dual nozzle part cooling duct for the stock Eryone
Description
Disclaimer: Use this thing at your own risk, it works for me, you are modifying the 3D printer. The author or the hosting site cannot be held responsible if anything goes wrong and messes up your print, machine or if your house catches fire. Use common sense and always wear proper protective gear when using power tools, grinders, drills, etc. This is an alternative cooling duct to the stock 4010 fan, it allows you to inspect what is printing from the front. Optionally, you may want to drill a 1.2mm hole to accompany the center mounting hole on the housing. Material: PETG Color: Any Support: Yes, tree, concentric on the build plate Line height: 0.2mm Line width: 120% to 125% of nozzle size Infill: 20% BOM 5015 fan, 5v for stock configuration, (12/24v if you have the modification on the fan voltage jumper on the Thinker motherboard) 1 x M3 x 25mm screw 1 x M3 nut (optional) 3 x M1.7 x 10mm self-tapping screw (reuse the original 4010 mount screws), the center one is an option. 3 x M2 washer (optional)
Statistics
Likes
0
Downloads
0