Gineer: CremaBot v2.2.0.7 Enclosure
Description
This Model Is The Enclosure For Gineer R&D'S Cremabot. Cremabot Is A Project Where A Standard Jura Impressa Xf50 Classic Coffee Machine Was Converted To Be An Iot Device, Allowing The Machine To Be Controlled From The Web. The Cut-Outs In The Top Half Of The Case Line Up Exactly With The Cremabot V2.2.0.7 Circuit Board To Allow For The Interface Cables To And From The Jura Coffee Machine, The End Stops And The External Power To Be Routed Through. The Last Cut-Out Fits A 4 Pin Header Directly Onto The Stepper Motor Driver If This Is Fitted. Check Out The Full Project At: Http://Gineer.Co.Za/Projects/Cremabot Https://Youtu.Be/Qj30F3_Xpho
Statistics
Likes
1
Downloads
0