BattPack Stowage Tub for storage with Mavic 2
Description
This stowage tub is designed to utilise the empty space the Mavic 2 Battery would normally occupy. When traveling with the Mavic 2 drone I keep the Battery in a separate place, so this 3D Printed Stowage Tub uses the battery area as storage space for; SD Cards, Cables, Feet Extenders and anything else that can fit into the surprisingly spacious compartment. #### Compatibility This has been tested in the Mavic 2 Pro but it should work OK in the other Mavic 2 models. * Mavic 2 Pro * Mavic 2 Zoom * Mavic 2 Enterprise #### Features * Snap-fit lid with lip for easy open * Latch clicks tub into place * Fits when the Mavic 2 arms and props are folded If anyone finds any problems (dimensionally or otherwise) post them up so I can get the fix model. #### Instructions * All parts should orientate correctly on slicer plate * After printing, check latch operates correctly before using it in the drone Credits * For the gallery image renders, this model was used: [DJI Mavic 2 Pro](https://skfb.ly/6R8AK) by MattMaksymowicz is licensed under [Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/). __Experimental Design Disclaimer__ This model has been designed for a specific use case, it has not yet undergone extensive testing so use it at your own risk. __Constructive feedback is appreciated.__
Statistics
Likes
1
Downloads
0