Soap Dispenser Pump "Cage" (Wagner EWAR)
Description
** Update, 05-SEP-2022: ** I have uploaded V2.0 of the file. I tested today and the slots to mount the cage were not deep enough. Therefore please do not use STL file V1.3 as it will probably not fit, use the new V2.0 file. ---- ### This is a holder for the pump in Wagner EWAR soap dispensers to re-mount it when the holding slots on the pump have been broken. Why this "thing"? Unfortunately, sometimes the soap in the soap dispenser runs out and then soap residue can dry up in the pump. Then the pump is very stiff and doesn't work. Some people (in our office) still try to get soap out by force which leads to breaking the slots in which the pump is mounted. In the picture gallery you can see the original part and the broken mounting slots in the other photos. Now, either you buy a new pump 937020 or 937021 as a spare part (approx. 80-100 EUR!) or put the pump into this "cage" and then put it back into the holder. This costs only about 2 EUR in material. (see the last two pictures in the gallery). I tested this with the 937020 pump in the WP173 holder, but the WP174 holder should be the same, also the 937021 pump is identical in construction just with a 200ml tank on top and therefore should also fit.
Statistics
Likes
0
Downloads
0