Samsung Galaxy Watch5 Pro Charging Stand Cradle
Description
Since the new charging puck not only features USB-C instead of USB A plug, 10W instead of 5W (if connected to a PD capable USB-C charger) but also a smaller footprint / diameter, I had the choice to stuff some sort of thick glue tape inbetween or fill it up otherwise or to design a new stand (or base it off an existing one - which I did: thanks Stefan042 and JSC, https://cults3d.com/de/modell-3d/gadget/samsung-galaxy-watch4-charging-dock) ... Well, introduction aside, this is new: - adjusted to fit the Watch5 Pro - not multi-part anymore - cable tunnel in the bottom - more polygonal shape - click-in puck design (depends heavily on your printer/print settings/filament though), hot glue worked fine with the Watch4 stand btw, any type of even extra strong double sided tape did not... The "edgy" design is more polygonal, basically I tried to create a smaller print but also to prevent my Cura 5.1 slicer to place the z seam in the front due to the rounded back. In hindsight I should have tried to modify the Fusion file, instead I cobbled it up in 3D builder. Meh ;)
Statistics
Likes
6
Downloads
0