Panavise Jaws and Soldering Fingers
Description
The PVSolderFingersRemix file is a combining of designs by Anthsorr and sanricstu, resulting in a pair of wide jaws with soldering fingers that can be slipped over the standard jaws of a Panavise 301 vise head. The second file PVSolderFingersV2, is remixing Anthsorr's clamp pads with solder fingers so they can be screwed directly on to the 301 head as a set of replacement jaws. This gives the option to have a slimmer jaw profile if desired. The V2 jaws pictured were printed at 75% in the X axis, leaving Y and Z at 100%. If printed at full 100%, you may need longer screws. I'm not certain as I've not done it yet. Both were printed in TPU but should work well in PETG or PLA if you desire a harder jaw face. V2 needs no supports. The slip-on version does require supports.
Statistics
Likes
0
Downloads
0