Mobula 7 1S Lipo Mount
Description
The original design was nice, except that (at least for myself) there were some issues: - couldn't fit the adapter to the mobula frame, the tolerances are too tight - the battery I used, which is the same as the one used in the original design, fitted too tight - the mounting mechanism required flexing the bottom mobula frame too much for my liking in order to get it mounted properly. So I went on and fixed it! - the locking pieces still sit just close enough to fit in the frame, but are easier to slide in - the battery compartment is now a tiny bit taller, to allow easier battery insertion. It still locks it in place firmly - the mounting mechanism has been updated to remove the need of bending the frame. Instead you now need to slide it in, and a small protrusion locks everything in place Post your makes and let me know if you have issues!
Statistics
Likes
0
Downloads
0