Modified WordClock Case and Stand
Description
This is a remix of the german "[Wordclock Wortuhr](https://www.thingiverse.com/thing:4693081)" case comprising the following changes: - I added a printed diffusor layer finishing the front cover. - I removed the hanger assembly on the back and the cable inlet on the side as I prefer to use the clock with a stand. - I removed the DIP mount from the interior part as I connected the USB cable to the ESP directly. - I added a cable inlet and cord grip on the back accordingly. - I designed a new “invisible” stand. Thanks to [N1cls](https://www.thingiverse.com/n1cls/designs) and [AWSW](https://www.thingiverse.com/awsw/designs) for this great project and their support building the word clock! **Hints** - When printing the multi-colored front cover make sure the first two layers for the diffusor are printed in a light or translucent color. The following layers should be printed with dark filament. - The stand has an inclination of 5% - I suggest to glue it to the back of the clock for more stability (the lower screw will be still accessible. - These models are just a modified case - for full instructions and appropriate software see “[Wordclock Wortuhr](https://www.thingiverse.com/thing:4693081)". **Donation** Find my models for free on [Thingiverse](https://www.thingiverse.com/apfelnutzer/designs) and [Printables](https://www.printables.com/social/309382-apfelnutzer/models). If you like my designs, you can [buy me a coffee](https://www.buymeacoffee.com/apfelnutzer). Thank you!
Statistics
Likes
3
Downloads
0