Dillon Vacuum Shroud- Short Trim
Description
This vacuum shroud does 2 things. First, It allows you to have a die directly behind the vac shroud in the adjacent station to your trimmer. You must first install that die and tighten the dillon lock ring. Then you can install this vac shroud on your trim die. I found it is best to use the lock ring under the toolhead if possible. Second, it has the bottom edge cut allowing it to fit the middle die spot on the Dillon 1050/1100 short trim toolhead. The other half of the shroud can be printed here: https://www.thingiverse.com/thing:4937593
Statistics
Likes
1
Downloads
0