Dual camera mount for Ducato, Boxer, Jumper, ProMaster >2006
Description
I wanted a dual camera on my camper van using these little cheap round cameras available on the internet and I didn't want to add additional holes to the vehicle. The frame is a 15mm thick plate which is mounted underneath the upper brake light and allows the cables to go through the original brake light cutout. The frame comes in two parts and has to be glued together. There has to be some seal added between the frame and the body. That might be some foam, Dekaseal oder butyl tape. The camera mounts can be rotated and are attached to the frame with a M5x30 screw and nut. Additionally you need 15mm longer screws for mounting the brake light. To align everything correctly to the original brake light mounts, there are two adapter pieces which fit into the square mounting holes in the back of the break light.. Although I've designed this for a L3H3 2017 Peugeot Boxer, this should work for all Fiat Ducato, Peugeot Boxer, Citroen Jumper and RAM ProMaster built after 2006.
Statistics
Likes
1
Downloads
0