Handles for Orion XT8 Dobsonian telescope mount
Description
After printing these 2 handles I sanded them down and coated them with epoxy to seal them from humidity. When assembling: First use (2) coarse wood screws to screw through the top holes in the handle into the mount. Then use a drill to drill through the mount, using the 2 large holes in the handle as guides. Now you can insert (2) [insert bolt size] bolts through the handle and mount. My printer only has a print volume of 120x120x120 which is why it is oriented this way. If you have the room, print it flat so you don't need so much support material.
Statistics
Likes
0
Downloads
0