Pimoroni Tufty 2040 Badge Spacer & Blackplate
Description
My partner wanted a custom spacer for their Pimoroni Tufty 2040 (https://shop.pimoroni.com/products/tufty-2040?variant=40036912595027) so they could have a Li-Po battery contained within the spacer and a back plate. Access to all the buttons and ports on the back side of the board is preserved (though i do have a little trouble with the power buttons as my fingers are bigger than some). This spacer and backplate can utilize the hanging feature of the Tufty or as shown in the photos, 2 magnetic badge strips. The back plate is from a 3mm piece of black Acrylic cut with the Laser head of the Snapmaker (though I did it once with the Laser and will be using the CNC head in the future, the burning Acrylic smell was strong). This handy print allows for a 3.7V 1200 mAh, ~7mm thick Li-Po battery to be plugged in, then secured with: x4 M2 x 16mm Allen Socket Head Screws x4 M2 Hex Nuts
Statistics
Likes
0
Downloads
0