Club Car Carryall 300 UTV Golf Cart
Description
Here is a model Club Car Carryall 300. The .stl is at 1:18 scale but I printed my models bigger. I think 1:18 looked smaller then I wanted when I put it in my slicer, so I scaled up to 1:16. I included the flat bed and also the pickup type bed. You can make it with or without the canopy. To make it with a canopy use "ROP_L" and "ROP_R" (I know carryalls don't really have roll over protection, but I don't know what else to call it.) and the "Canopy" file. If you don't want the canopy use "Bar_r" and "Bar_l" which are the arm rest like things. Use either "Bed" or "Flat_Bed" depending on what you want. Print one of everything except you will want to print 4 tires, 4 rims and 4 axles. There are some alignment features for assembly, but you'll probably need some of your preferred model glue. I printed the tires with TPU and they pressed onto the rims nicely without any glue needed. The axles needed some fine filing/sanding to ensure a nice fit with the wheels rolling adequately. I put the wheels on the axles then glued the axles to the body. After applying glue, I used my 3d print pen to weld the axles securely and permanently to the body. I added a windshield to the white one that I made but that wasn't 3d printed, it was just a piece of clear plastic that I had handy. I also painted the lights and grille. If you are real fancy maybe you'll paint the dash board and emblems too.
Statistics
Likes
1
Downloads
0