Device for watering indoor plants 2
Description
The device I designed waters indoor plants in the same way as it happens in nature - in portions with a period of several days. The frequency of watering depends on the rate of evaporation of water from the plant. After installing the water bottle, all processes take place autonomously and automatically. Preliminary adjustment of the device for the watered plant is required. The video shows how it all works https://www.youtube.com/watch?v=6UFJzom3hnY I publish files with tanks of two sizes. In addition to the printed parts, the following are required: Two metal tubes with a diameter of 16mm., The length depends on the plant. Bolts m4х25mm with nuts and washers 12 pcs. Bolts m6х35mm with nuts and washers 2 pcs. studs m4 3 pcs. + 12 nuts to them. I made the rest of the parts from plexiglass, but you can use wood, other plastic, sheet metal. Bolts and nuts must be selected for these parts.
Statistics
Likes
1
Downloads
0