Universal Video Projector Mount
Description
Model has been moved to **Printables.com**: - https://www.printables.com/model/148171 I change my video projector recently and could not install it on its feet at the same place. I designed this mount to be **as universal / modular as possible**: - The **3-points fixation has some degree of freedom**, as it can slide along the wood and be reversed. If you have more the 3 points of attachments, print more screw holders. - There is **2 different sizes of screw holder** so you should be fine ! - The design allow for **adjustment of “pitch” and "roll"** angle of projection. The front piece of wood can be moved up and down and slightly twisted left or right. - It is designed for the installation on the picture (reversed on shelf) but it could 100% be the other way round. - Width of projector doesn't matter, just cut the wooden rod to the desired size. Once you are happy with your angles just insert a small screw to fix the front wooden rod in place (see picture, in black). For the **wood rod** I used an easy to source **20mm diameter**. Design is a bit bulky, I would admit that ^^. Hope it helps someone ! info: if it can help, on the picture it is a Epson EH-TW750
Statistics
Likes
2
Downloads
0