windage and elevation adjustable mount + Leupold LTO mount
Description
A model I made to allow airsofters to mount and zero any non-zeroable optic such as thermals. The model uses 3x M3x40mm metric hex bolts, 5x M3x40mm flathead screw bolts, and nuts for either. The flathead is used in the windage adjustment, a hex bolt in the elevation, and 4x flatheads for bolting the Leupold mount together (threads into print, no nut needed). the remaining bolts are used to mount the whole mount to the rail of your choice. design is in the prototype phase.
Statistics
Likes
1
Downloads
0