Maker Gear Display / Camera and tool mount
Description
This will work on an M2 and M3. I configured it originally for the M2 for use with Klipper. I'm a fan of press in thread heat set inserts, so they are installed in printer sleeve, swivel head, base head (Center from inside) and the front of the camera mount for a set screw. all the screws are cap M3, I'm not sure on the lengths. For the camera swivel and head I used the parts from this Thing Created by "Sneaks": https://www.thingiverse.com/thing:3114849/files. They worked really well and saved me some time. I used a standard Raspberry Pi Cam. The screen is a BigTreeTech TFT 50 with a Raspberry Pi3b. I'm planning on a couple of tweaks when I get some more time. Screen: https://www.amazon.com/dp/B08FD2YZ23?psc=1&ref=ppx_yo2ov_dt_b_product_details Camera case: https://www.thingiverse.com/thing:3114849/files raspiCamBack.STL raspiCamCover_Lense.STL BallNut.STL Thumb_Bolt.STL Heat set inserts: https://www.amazon.com/cSeao-120pcs-Inserted-Knurled-Embedded/dp/B07D683Q26/ref=sr_1_9?crid=11FH2RXSYM3UM&keywords=brass+heat+set+inserts&qid=1663192395&sprefix=brass+heat+set+inserts%2Caps%2C113&sr=8-9 Stand-Offs for the LCD / Pi (needs one on Screen, then install Pi, then the standoff included with the Screen(used to attach Pi), then another on top. It leaves enough room to plug items into the PI header) https://www.amazon.com/dp/B0824F2JZ9?psc=1&ref=ppx_yo2ov_dt_b_product_details 2.5mm screws for LCD and LCD pivot side: https://www.amazon.com/dp/B09WJ4WF9K?psc=1&ref=ppx_yo2ov_dt_b_product_details
Statistics
Likes
0
Downloads
0