CreatBot F430 Spool Holder
Description
This is a revised spool holder for the CreatBot F430 that helps reduce drag on the spool, tho the friction between the spool and holder is low enough that the bearing don't usually turn. ## Required Hardware: | QTY | Item | Source | |:------:|:------|:---------| | 1 | M8 x 45mm Socket-Head Cap Screw | [McMaster-Carr](https://www.mcmaster.com/91290A446/) | | 1 | M8 Nylon-Insert Locknut | [McMaster-Carr](https://www.mcmaster.com/94645A210/) | | 2 | 688 or 608 Radial Bearings | [McMaster-Carr](https://www.mcmaster.com/7804K117/) | | 1 | 8mm ID x 10mm OD Ring Shim | [McMaster-Carr](https://www.mcmaster.com/92927A154/) |
Statistics
Likes
0
Downloads
0