Hydralisk - Hive Fleet Zerg
Description
Hydralisk from StarCraft 2. These models are a remix of Fry-Charante's STL. I used Zbrush to improve the polygon count and clean up some of the detail work. I then used Blender to rig the model and created 4 poses. The model fits onto a 40 mm base, and is in 28 mm scale. This means that the Hydralisk is about the same height as a space marine. If you want a more lore accurate size I recommend scaling the model up by 125%. Once scaled up the model should still fit on a 40 mm base, but there will be more overhang. I got great results using my Elegoo Mars 3 with the a mix of 20% Siraya Tech Tenacious and 80% Siraya Tech Fast. I used Siraya Tech's recommended setting for the Fast resin. You might want to increase the amount of Siraya Tech Tenacious to 30% - 35% to improve the flexibility and shock resistance of the print. I don't recommend using 40% or more because the models loses some of the sharp angles and the arms tend to droop from the weight of the claws.
Statistics
Likes
6
Downloads
0