BTT Octopus Pro V1.0(429) Case
Description
This case will fit a BigTreeTech Octopus V 1.0 (429). I'm assuming it will fit the other versions since the holes appear to be the same. I used an adapter plate to connect it to the Maker Gear M3 ID. I wanted to make sure the screws at the bottom wouldn't touch the Octopus and cause a short. The power plug is the same as used by the MakerGear M3. It'll need to be glued in to make sure it stays in place. I used brass heat inserts and M3 socket head screws to attach everything.
Statistics
Likes
1
Downloads
0