Water tap
Description
Several plastic parts and a pair of seals are needed for the construction. You can see how the valve works in the [video](https://youtube.com/shorts/uJEVpxr-tRU). The valve is primarily designed for plastic canisters 10l,15l.... Lid for canister is currently not modeled, and is necessary drill 25mm hole to original canister lid. Plastic parts: - main - valve - nut - screw - air (optional I have better result without this part) Seal parts: - 3x Silicone O-Ring 22x18x2mm for example [this](https://www.aquateam.sk/eshop/sada-o-kruzok-22x18-5ks/p-410578.xhtml) or [this](https://www.ebay.com/itm/313618601693) - 1x flat seal 1" or 25x38x3mm for example [this](https://www.genszky.sk/tesnenia/492-tesnenie-priemer-25x38x3.html) Printer settings: PLA filament 0.4 mm Noozle 0.2 mm quality Support required only for main
Statistics
Likes
1
Downloads
0