RV Mini AC Control Box
Description
Had to replace my roof AC unit with one off my old rig. The intake plenum is much smaller as this was an older unit and had manual controls (Dometic). I wanted to use the thermostat, which hooks up to the 12v relay control box. The original control box was way too big to fit up inside the plenum, and had a lot of empty space inside. I decided to make a smaller box that I could mount below, where it would not obstruct the air flow. Note: This requires a power connection, and a 9 pin connector to the roof unit, which you will have to order and wire up. Both connectors use the same size pins. I ordered them from Mouser, her are the numbers 571-925712-2 - female .140" MateNLock pins 571-925713-1 male .140" MateNLock pins 571-1-350346-0 3-pin external power connector 571-1-350347-0 3-pin panel mount connector 571-14806720 9-pin panel mount connector You'll need a crimper to attach the pins to the wires. I ended up getting this one, since it had a lot of crimping options. https://www.amazon.com/gp/product/B091Q5YKZT
Statistics
Likes
0
Downloads
0