Spice Rack / Shelf
Description
This Is A Simple Bracket Used To Create A Riser Type Spice Shelf. Some Of The Other Designs I'Ve Found Had Shelves That Were Too Narrow For What I Was Looking For So I Essentially Doubled The Width By Using Two Pieces Of Stained 1X2" Wood Side By Side For Each Shelf - This Makes The Actual Dimensions Of Each Shelf 3" Wide. I Used A 6Ft Section Of 1X2" And Cut It Into 4 Equal Lengths Of 18", However, You Can Adjust The Length To Fit Your Need. The Same Bracket Is Designed To Work For Both The Right And Left Sides And A Third One Could Optionally Be Used To Support The Middle Of Long Shelves. I Chose To Print The Bracket With White Filament And Stain The Wood With A Mahogany Look To Provide Some Contrast But You Can Stain Or Paint However You Want. I Also Used A Durable Clear Coat Spray To Protect And Allow For Easier Clean Up. If Planning To Paint I Would Recommend Using A Spray To Allow For Smooth And Even Finish - A Thick Paint Layer May Cause The Shelves To Not Fit As Well In The Bracket. Lastly, During Final Assembly I Would Recommend Using A Small Drill Bit To Pre-Drill The Screw Holes And Prevent Possible Edge Splitting. Bom: * Printed Brackets (X2) * 6Ft Of 1" X 2" Wood (Actual Dimensions 3/4" X 1.5") - Cut And Stained/Painted In 4 Equal Lengths Pieces * Desired Stain / Paint / Protective Clearcoat * 3/4" #8 Wood Screws (X8)
Statistics
Likes
593
Downloads
0