Caddx Ant Lite cam canopy for EPP
Description
A little glued camera box for EPP or styrofoam RC planes. You can drill a hole in the foam and push the stand tightly without screws. * Compatible with both CADDX Ant lite and Ant Mini FPV cams * There is no special latches for the camera; it sits inside almost without a gap between PCB and inner edges of the box. * The inner diameter of the stand pipe is wide enough to pass the cam connector. * I used a silicone glue on the inner side of lens hole to fix it and make weatherproof. This is very soft glue, so I can "unbox" it later if needed. Also I used this glue to fix the box stand in the foam. * Also I glued the rear box cap with CA.
Statistics
Likes
0
Downloads
0