UDL XM1014 SHELLS
Description
These are Shells which I tested in various forms for the UDL XM1014 Shell Ejecting Blaster. (or one of it's metal Variants). ATTENTION- The shells require O-Rings to seal at the bottom. Please use the following size: 12mm OD, 6mm ID, 3mm thickness or near that size. There is a Shell Version for brassing with KS140 (17/32'') short dart and one for Ultra Darts. Put those included 3/4 Darts where they belong and give them to your cats and dogs as toys. If you put in the 14KG and the green O-ring upgrade you can expect 100-115FPS with worker Short Darts gen2+HA or Worker Bamboo, 130FPS with Azur Dragons. With the KS140 brass (17/32'') put inside around 49-50mm long. 80 to 95FPS for the Ultra Dart Shell. I strongly advise you to fix the O-ring, with something similar to a 17mmID and 3mm thickness O-ring if you don't want to order the "upgrade´" one from a chinese shop. With just the O-Ring fixed you can expect mid 70 FPS with the Brassed Shells(!) This will make the blaster actually fun and useable.
Statistics
Likes
0
Downloads
0