Powerplay Dock
Description
So a Powerplay pad would have been too small, so I decided to just buy one of these mouse chargers: https://www.amazon.com/dp/B09BVY4JZ2?psc=1&linkCode=sl1&tag=dsl07-20&linkId=4ef618a62bae3cf9b562243be19b709d&language=en_US&ref_=as_li_ss_tl to charge my new Hero 503: https://www.amazon.com/dp/B09BVY4JZ2?psc=1&linkCode=sl1&tag=dsl07-20&linkId=4ef618a62bae3cf9b562243be19b709d&language=en_US&ref_=as_li_ss_tl The mount works well enough but it's not really big/heavy enough to stay in it's spot when I pull the mouse off, so it ends up moving around and being sloppy. The bottom is silicon or some other type of rubber that I'm not gonna be able to stick anything too. So I made this so I could cut out and use AirStick on it: https://www.amazon.com/dp/B09BVY4JZ2?psc=1&linkCode=sl1&tag=dsl07-20&linkId=4ef618a62bae3cf9b562243be19b709d&language=en_US&ref_=as_li_ss_tl I ended up with a locked in mouse mount without drilling holes or using permanent adhesives to my new desk. Though I suppose this could be modified with screw holes if that's your thing. or you wanted to mount on a wall. .obj attached too if you want to make your own modifications. Printed in PETG so it has a little bit of flex, it is a tight fit.
Statistics
Likes
0
Downloads
0