Servo adapter for using Turnigy TGY-306G in Carisma GTB
Description
This Is A Printed Adapter To Mount A Tgy-306G Servo Using The Stock Servo Bracket. For The Servo To Fit You Need To Grind Away 1Mm From Both Of The Tabs On The Sides Of The Servo. It Went Fast To Do With Just Using Some Sand Paper And The Screw Holes Can Still Be Used. This Thing Was Made With Tinkercad. Edit It Online Https://Www.Tinkercad.Com/Things/Gnsaczwfle7 Updated: 2015-05-17 Moved The Servo Out 2Mm To Give It Alittle Better Clearance To The Belt And Hopefully Give Better Geometry Towards The Steering Arm.
Statistics
Likes
4
Downloads
0