HOWARD DGA-5 "IKE" VERSION 2.2 - PRINT TEST PARTS
Description
Important note: It's only test parts! PLA: Canopy and a front part of the fuselage showing the nice external structure with its louvers and the practical internal structure with extra compartment for the battery. LW-PLA: Modified horizontal stabilizer design for weight reduction. Additional Cura project files (see pictures) including detailed print settings and gcode are available here: https://www.rc3dmarket.com/editor/editor-image/5/20220426-Howard-DGA5-Test-Files.zip Version 2.2 of the Howard DGA-5 "IKE" allows to (optionally) insert a carbon fiber pipe into the wing as extra robustness margin for cutting flight maneuvers. Some parts of the landing gear are reinforced as well and slightly increased louver openings in the fuselage further improve the scale impression. Last but not least, the engine side pull was increased to improve the take-off behavior. All details can be found in the user guide (see link below). The complete aircraft is available for download at https://www.rc3dmarket.com/3dprcfun User guide: https://rc3dmarket.com/editor/editor-image/5/Howard-DGA-5-IKE-Version-2.2-User-Guide.pdf Part changes from version 2.1 to version 2.2 (can be considered as additional printed test files): https://www.rc3dmarket.com/editor/editor-image/5/Changes-20220610-Version2.2.zip Step-by-step video guide: https://youtu.be/y_rNPT2Pv-0 3D printed Howard DGA-5 in action: https://youtu.be/g-8eh7MfjDs https://youtu.be/Xv0kEhvdzHY https://youtu.be/4av5OILo4RU https://youtu.be/rBRUHhJTIQ4 RC groups thread: https://www.rcgroups.com/forums/showthread.php?3984475-Howard-DGA-5-IKE-a-racer-of-the-1930s
Statistics
Likes
0
Downloads
0