Flexible Large Can Lid (watertight)
Description
Watertight on most normal cans, 10-mm diameter / 1.2kg cans. Also see my PLA versions if you have no flexi filament. And see my large version of this lid. Avoid brittle PLA's for this, it needs some flex. Print settings (Cura): Walls x 3 Top/Bottom x 6 .2mm layer height .4mm width 215c print 60 c bed 30mm/s Flow 100% (I usually use 94% but aparently flexibles need a bit more flow) Coasting enabled Coasting Volume 0.032 (helps remove the seem) Fan 0% first layer to 50% at layer 5 No brim or skirt needed
Statistics
Likes
2
Downloads
0